Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Clarksville, TN
Chimney repair in Clarksville usually starts with something a homeowner can’t see: a hairline crack in a clay flue tile, a crown that’s pulled away from the stack, or a cap that’s been loose long enough for water to work its way into the masonry. The housing stock here makes that a common call. Clarksville’s core is full of 1950s through 1980s brick ranches and split-levels with original masonry fireplaces, plus a newer ring of builder-grade subdivisions where prefab metal fireplaces need manufacturer-specific parts. We handle the sweep, the repair and the liner work with professional-grade materials, not off-the-shelf fixes. Call (866) 942-9931 to set up an estimate.
Why Clarksville Homes Are Different
Clarksville’s humid subtropical climate does a particular kind of damage to a chimney. Summers stay muggy, and January and February swing above and below freezing repeatedly. That freeze-thaw cycle works on the sandy local brick and the clay tile flues behind it, widening cracks and spalling the brick face a little more each winter. A crown that isn’t sealed lets water in, and the shoulder season gives it months to sit there.
The housing tells its own story. Downtown and St. Bethlehem homes often have stacks that predate modern liners, so they need relining before they can safely re-enter service. In Ringgold and New Providence you’ll find mid-century masonry fireplaces with their original clay tiles. The 2010s and 2020s subdivisions are a different job entirely – prefab metal fireplaces built to a manufacturer’s spec, where the wrong component voids the listing. Add Clarksville’s position on the Fort Campbell side of the state line, with 101st Airborne families rotating every two to four years, and you get a steady flow of older homes changing hands with fireplaces that were never swept by the last owner.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Clarksville Services
Two calls come in more than any other from Clarksville homeowners: a sweep before the burning season, and a dryer vent that hasn’t been touched since the house was built.
Chimney Sweep in Clarksville
A proper sweep here means more than running a brush up the flue. We clean the firebox, the smoke chamber and the flue, then run a camera to see what the brush can’t reach. In Clarksville’s older masonry chimneys, that camera is what finds the cracked tile or the gap in the mortar joint before it becomes a real problem. The long humidity season also means we check the cap and crown on every visit, because water intrusion is the quiet cause behind most of the masonry damage we see. You can book a chimney sweep in Clarksville as a standalone visit or as the first step before any repair work.
Dryer Vent Cleaning in Clarksville
Lint buildup in a dryer vent is one of the leading causes of residential house fires, and it’s the hazard most homeowners never think to check. In Clarksville’s newer builder-grade homes, the vent run is often longer than it should be, with a couple of elbows that trap lint where you can’t see it. We clear the full run and confirm the exterior damper opens and closes properly. It works as a standalone job or as an add-on when we’re already at the house. Book dryer vent cleaning in Clarksville and we’ll check the whole path, not just the section behind the appliance.
Chimney Repair in Clarksville
Chimney repair in Clarksville is mostly a story about age and water. The 1950s to 1980s brick ranches around Ringgold and New Providence were built with clay-tile flues that have now been through decades of freeze-thaw swings, and the sandy local brick spalls when moisture gets in and stays. Out in rural Montgomery County the pattern is different but the outcome is similar: wood-burning appliances installed to offset expensive propane and electric heat, burned hard for years, often without a sweep. Both paths lead to the same call. Our Chimney Repair work covers the full range, from a cap replacement to a HeatShield resurfacing or a DuraFlex liner install.
Chimney Cap Installation
Signs you need it
You’re seeing squirrels or birds around the flue, water stains on the firebox ceiling, or an open stack with nothing on top of it.
What it costs in Clarksville
Chimney cap installation in Clarksville typically runs $150 to $400, depending on the flue size and whether the cap is a stock or custom fit.
How we do it
We measure the flue opening, fit a cap with a proper spark screen and mounting, and seal it to the crown so water runs off rather than in.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted through, dented, missing its screen, or sitting loose enough that wind moves it.
What it costs in Clarksville
Replacing a chimney cap in Clarksville usually falls in the $150 to $400 range, with multi-flue and custom sizes at the upper end.
How we do it
We pull the old cap, inspect the crown and top courses of brick while it’s exposed, then set the new cap and confirm it’s square and sealed.
Chimney Liner Installation
Signs you need it
The camera shows cracked, missing or offset clay tiles, or the flue was never lined at all.
What it costs in Clarksville
A chimney liner installation in Clarksville typically runs $1,800 to $4,500, and the flue length and liner type drive most of the difference.
How we do it
We size the liner to the appliance, insulate where it’s called for, and install a DuraFlex flexible liner down the full flue before connecting and testing the appliance.
Chimney Crown Repair
Signs you need it
The crown has visible cracks, is pulling away from the flue, or water is finding its way down the outside of the stack.
What it costs in Clarksville
Crown repair in Clarksville generally lands between $300 and $800, with full crown rebuilds at the higher end.
How we do it
We clear the failed material, rebuild or reseal the crown with a slope away from the flue, and check the flashing joint at the roofline while we’re up there.
What Chimney Repair Costs in Clarksville
These are typical ranges for the work we do most in Clarksville. The written estimate you get on site sets the final price.
| Item | Typical range in Clarksville |
|---|---|
| Chimney cap installation | $150 – $400 |
| Chimney cap replacement | $150 – $400 |
| Chimney crown repair | $300 – $800 |
| Chimney liner installation | $1,800 – $4,500 |
Do I really need a new liner in Clarksville?
Not always. If the tiles are intact and the camera shows a clean flue, a sweep is enough. When the tiles are cracked, offset or missing, a liner is what keeps heat and carbon monoxide out of the house structure.
Can a cracked flue be resurfaced instead of relined?
Often, yes. HeatShield ceramic resurfacing rebuilds deteriorated flue tiles from the inside, which costs less than a full liner and is a repair most sweep-only companies can’t offer.
Brands We Service in Clarksville
We work with professional chimney trade brands including DuraFlex for flexible liner systems, HeatShield for ceramic flue resurfacing, Gelco and Olympia Chimney. When a repair calls for a manufacturer-specific component, we can source and fit it rather than sending you elsewhere. Take a look at our brands to see the full list we work with.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Clarksville, TN
Every figure below is a typical range, not a quote. The written estimate is what sets your price.
| Service | Typical range in Clarksville |
|---|---|
| Chimney sweep and inspection | $150 – $350 |
| Level 2 camera inspection | $250 – $500 |
| Chimney cap installation | $150 – $400 |
| Chimney cap replacement | $150 – $400 |
| Chimney crown repair | $300 – $800 |
| Chimney flashing repair | $250 – $600 |
| Chimney liner installation | $1,800 – $4,500 |
| HeatShield flue resurfacing | $1,200 – $3,000 |
| Dryer vent cleaning | $120 – $250 |
In Clarksville, the two things that push a price up most are height and access: a tall stack with a steep roof pitch takes more setup, and a flue that’s been water-damaged for years needs more prep before a liner goes in. We give you the price upfront before any work starts, and nothing gets added after the fact without your say-so.
Neighborhoods We Serve in Clarksville
We cover the whole of Clarksville, from the older brick streets near downtown out through the newer subdivisions ringing the city. Ringgold and New Providence have a lot of mid-century masonry chimneys that need crown and flue work. St. Bethlehem homes often need relining before first use. The 2010s and 2020s builds on the edges of town need prefab-specific servicing.
- Ringgold
- New Providence
- St. Bethlehem
- Downtown Clarksville
Response time across Clarksville is generally the same regardless of neighborhood. We answer 24/7, and fast dispatch is available from 7am to 7pm. We’re closed Saturday.
Service Area – Cities Near Clarksville
The work we do in Clarksville extends into the surrounding communities on both sides of the state line. We also serve Adams, TN and Cumberland City, TN to the west and northwest, and Cedar Hill, TN and Charlotte, TN to the south in Dickson County. If you’re just outside Clarksville and not sure whether we reach you, call and we’ll tell you straight.
Serving Clarksville, TN – Our Local Coverage Area
We serve Clarksville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Clarksville
A chimney sweep in Clarksville typically runs $150 to $350, and a Level 2 camera inspection usually lands between $250 and $500. The written estimate sets the final price. Call (866) 942-9931 for an exact quote – estimates are free.
It depends on the scope. A cap or crown repair usually doesn’t require one, but a full liner installation or structural rebuild may. Check with the city’s building department before the work starts, and we’ll tell you what we know about your specific job.
Yes. Clarksville sees a real rush of pre-sale sweeps and Level 2 camera inspections between May and August, when military families rotate out. We can schedule the inspection around a closing timeline and put the camera findings in writing for the buyer and lender.
If your chimney needs a sweep, a repair or a liner, or your dryer vent hasn’t been touched in years, call (866) 942-9931 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Clarksville Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Carrie Sutton"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Danielle Parker"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Eric Novak