Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Erin, TN
Chimney repair in Erin usually means one of two things: a masonry fireplace in an older farmhouse that has lost mortar and flue tiles to decades of freeze-thaw, or a freestanding wood stove whose pipe has been run hard through a cold winter. Both need someone who can clean the system and then fix what the cleaning exposes. That is the work we do here: sweep, inspect, and repair. Call (866) 942-9931 to set up a free estimate.
Why Erin Homes Are Different
Erin sits in Houston County, in the rolling hills of northwest-middle Tennessee, and the housing stock tells the story. Most of what we see are older rural single-family homes, farmhouses, and manufactured homes on acreage. A lot of them heat at least part-time with wood, and many lean on a freestanding stove or a masonry fireplace as backup heat when winter ice storms take the power out. That is not a decorative fire; it is the heat source that has to work when everything else fails.
The climate here does two things to chimneys. Cold, damp winters with occasional ice storms drive heavy seasonal burning and produce condensation and freeze-thaw cycles that crack flue tiles and mortar crowns. Humid summers speed up creosote odor and rust on caps. Put those side by side over years and you get aging structures where dampers, flue tiles, and crowns are already degraded before the first fire of the season. In ZIP code 37061 we routinely find stovepipes with heavy third-degree creosote from a winter run on wood that was seasoned but not fully dry. That buildup is why a pre-season sweep matters more here than in a suburban market where the fireplace is mostly ornamental.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Erin Services
Two jobs come up more than any other when Erin homeowners call: getting the flue cleaned before burning season, and keeping the dryer vent clear.
Chimney Sweep in Erin
A sweep here starts with the firebox and the stovepipe, because that is where rural Erin homes collect the most creosote. We brush the flue, check the damper and the cap, and run a camera to see the flue tiles from the inside rather than guessing from the firebox. In older farmhouses the tile joints are often the place problems hide, and the camera is what shows them. You get a photo report of what we found, so the recommendation is something you can look at yourself. For the full rundown, see Chimney Sweep in Erin.
Dryer Vent Cleaning in Erin
Lint buildup in a dryer vent is one of the leading causes of residential house fires, and in rural homes the vent run is often longer than it should be, with a run through a crawlspace or an exterior wall that nobody has looked at in years. We clear the duct, check the outside termination, and confirm the flap opens and closes. It works as a standalone job or as an add-on when we are already out for the chimney. Details are on Dryer Vent Cleaning in Erin.
Chimney Repair in Erin
Repair is the backbone of chimney work in Erin, and the reason is the housing. Most of the homes we look at are older rural structures with masonry fireplaces or freestanding wood stoves, and the flue tiles, dampers, and mortar crowns have taken decades of use and freeze-thaw. The humid summers and damp winters here crack tile and mortar faster than a dry climate would. We diagnose with a camera and repair from the same relationship, so you are not hunting for a second contractor once the inspection turns something up. Our Chimney Repair work covers everything from a new cap to a relined flue.
Chimney Crown Repair
Signs you need it
You need crown work when the concrete or mortar cap on top of the chimney is cracked, crumbling, or pulling away from the flue, which lets water straight down into the masonry.
What it costs in Erin
Crown repair typically runs $350 to $700, and a full crown rebuild $600 to $1,200, depending on how much of the top needs to come off.
How we do it
We chip out the failed mortar or concrete, reform the crown with the proper slope away from the flue, and seal the joint where the flue meets the crown so water sheds instead of soaking in.
Chimney Cap Installation
Signs you need it
An open flue with no cap is the sign: rain, birds, and squirrels get in, and the rusted or missing screen lets sparks out onto a rural roof surrounded by trees.
What it costs in Erin
Chimney cap installation typically costs $250 to $650, with stainless caps at the higher end because they hold up to the humid summers here.
How we do it
We measure the flue, fit a cap sized to the crown, and fasten it so the screen covers the opening without blocking draft, then check it sits level against the crown.
Chimney Liner Installation
Signs you need it
Cracked or missing flue tiles, a stove that smokes back into the room, or an unlined flue behind a wood stove all point to a liner problem.
What it costs in Erin
A liner installation is typically $1,800 to $4,500 depending on flue height and whether the old tile has to be cleaned and prepped first.
How we do it
We clean and inspect the flue, then install a DuraFlex flexible liner sized to the appliance, insulate it where it matters, and connect it top and bottom with a proper cap and top plate.
Chimney Flashing Repair
Signs you need it
Water staining on the ceiling near the chimney, or flashing that has pulled loose from the roof, means the roof-to-chimney seal has failed.
What it costs in Erin
Flashing repair generally runs $300 to $800, and it costs more when the flashing has to be rebuilt against a steep roof pitch.
How we do it
We pull the old flashing, clear the roof channel, set new flashing into the shingles and the chimney, and seal the joints so water runs off rather than pooling.
What Chimney Repair Costs in Erin
These are typical ranges for the repair jobs we see most in Erin, not a fixed quote. The written estimate sets the final price.
| Item | Typical range in Erin |
|---|---|
| Chimney crown repair | $350 – $700 |
| Full crown rebuild | $600 – $1,200 |
| Chimney cap installation (stainless) | $250 – $650 |
| Chimney flashing repair | $300 – $800 |
| Chimney liner installation | $1,800 – $4,500 |
Do I really need a new liner in Erin, or can it be resurfaced?
Sometimes it can be resurfaced. If the flue tiles are cracked or spalling but structurally sound, HeatShield ceramic resurfacing can restore the flue without a full liner replacement, which costs less. The camera tells us which route is right. Call (866) 942-9931 for a free estimate.
What actually happens if I skip chimney repair in Erin?
Small cracks and loose mortar don’t stay small. Water works into the masonry, freeze-thaw widens the damage over winter, and a cracked flue or heavy creosote raises the risk of a chimney fire. We tell you plainly when a repair can safely wait and when it can’t. Call (866) 942-9931.
Brands We Service in Erin
We work with professional chimney trade brands you won’t find at a hardware store, including HeatShield for ceramic flue resurfacing and DuraFlex for flexible liner systems, along with Gelco and Olympia Chimney components. When a repair needs a part, we identify the right one for your flue rather than making do. See our brands for the full list.
Pricing for Chimney Company in Erin, TN
These are typical estimated ranges for Erin, not fixed prices. Several things push a price up here: a tall or steep-pitch chimney, heavy creosote that needs extra time, and older masonry where the tile or crown has to be rebuilt before it can be sealed. Every job gets a written estimate agreed before we start, so the number on paper is the number you pay.
| Service | Typical range in Erin |
|---|---|
| Chimney sweep and inspection | $150 – $350 |
| Camera inspection with photo report | $100 – $250 |
| Chimney crown repair | $350 – $700 |
| Full crown rebuild | $600 – $1,200 |
| Chimney cap installation | $250 – $650 |
| Chimney cap replacement | $200 – $550 |
| Chimney flashing repair | $300 – $800 |
| Chimney liner installation | $1,800 – $4,500 |
| HeatShield flue resurfacing | $1,200 – $3,000 |
| Dryer vent cleaning | $125 – $275 |
See the difference
Before
After
Before
After
Before
AfterNeighborhoods We Serve in Erin
We cover homes throughout Erin and the surrounding rural roads in Houston County, including the older farmhouses and manufactured homes on acreage that make up so much of the local housing. Because the area is spread out, we book a window and confirm it with you, and dispatch runs from 7am to 7pm, so a call lands in the next opening. Whether you’re near the center of town or out on a county road, the sweep, the camera inspection, and any repair all get handled in one visit where the schedule allows.
- Downtown Erin and the streets around the courthouse square
- Homes off Highway 13 north and south of town
- Rural acreage along Highway 49
- Farmhouses and manufactured homes on outlying county roads
Service Area – Cities Near Erin
Erin sits in Houston County, and we also take chimney and vent calls from the towns around it. If you’re just outside Erin, we can still get you on the schedule. Check the city page for your area: Cumberland City, TN to the north, Tennessee Ridge, TN to the west, Vanleer, TN to the southeast, and Dover, TN to the northwest. Call (866) 942-9931 and we’ll confirm coverage for your address.
Serving Erin, TN – Our Local Coverage Area
We serve Erin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Erin
Dispatch runs 7am to 7pm, Sunday through Friday, and we book you into the next opening. Most Erin sweeps are scheduled within a few days, and we confirm the window when you call. Call (866) 942-9931 to book.
It depends on the scope. A cap, a crown, or a flashing repair usually doesn’t, but a full liner installation or structural masonry work may require one. Ask the city of Erin’s building office, and we’ll tell you what the job involves. Call (866) 942-9931.
Yes. We serve Erin and the rural roads around it in Houston County, plus nearby towns like Cumberland City, Tennessee Ridge, Vanleer, and Dover. Call (866) 942-9931 and we’ll confirm your address is in range.
Ready to Book Your Erin Chimney Service
If you heat with wood, the sweep is what keeps it safe, and the repair work is what keeps it going. We’ll sweep, inspect with a camera, show you what we found in a photo report, and fix what needs fixing with the right professional-grade parts rather than a patch. Nothing gets recommended without evidence you can see for yourself, and we’ll say plainly when a repair can safely wait. Call (866) 942-9931 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Erin Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Carrie Sutton"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Yolanda Dawson"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Andre Coleman