Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Clarksville?
Fireplace services in Clarksville typically run $95 to $325 for a professional chimney sweep and inspection, $350 to $1,200 for common chimney repairs, and $2,400 to $5,500 for a full flexible liner installation. Most homeowners book the basic clean-and-inspect first and only move into repair work if the inspection turns something up. The written estimate you get before any work begins is what sets your final price.
Our technicians have up to 10 years of experience, and we handle cleaning, repair, and liner work under one company so you’re not chasing a second contractor after an inspection reveals a cracked flue or a failing crown. Free estimates, and the number to call is (866) 942-9931. We answer 24/7.
Fireplace Services Cost Breakdown (2026)
Here’s what the main jobs tend to run in the Clarksville market. These are typical estimate ranges, not quotes. Flue size, access, roof pitch, and the condition of what we find all move the number.
| Service | Typical Cost Range | What’s Included |
|---|---|---|
| Chimney sweep and basic inspection | $95 – $325 | Creosote removal, firebox cleaning, smoke chamber, visual safety check |
| Dryer vent cleaning (standalone) | $75 – $200 | Full lint line extraction from dryer to exterior vent |
| Chimney crown repair or rebuild | $300 – $900 | Sealing cracks or replacing the top crown to stop water intrusion |
| Masonry repointing / tuckpointing | $350 – $1,200 | Grinding out failed mortar and repacking joints in the stack |
| Flue tile crack repair with HeatShield resurfacing | $700 – $2,000 | Ceramic resurfacing of deteriorated flue tiles without full tear-out |
| Firebox / smoke chamber repair | $600 – $2,200 | Repointing firebox brick, parging the smoke chamber for a smooth draw |
| DuraFlex flexible liner installation | $2,400 – $5,500 | Full reline for an unlined, corroded, or compromised flue |
| Damper replacement | $300 – $750 | Removing a seized damper and fitting a working one |
| Chimney cap installation | $150 – $500 | Fitting a stainless or copper cap to keep rain, birds, and debris out |
What pushes a price up is rarely the cleaning itself. It’s what the inspection finds. A simple sweep on a clean, sound chimney sits at the low end. Once you start talking about a cracked flue tile, a crumbling crown, or a chimney that was never lined, you’re into repair territory, and that’s where the range widens. Access matters too. A fireplace on a low, easy-to-reach part of an older Clarksville roof takes less time than one on a steep-pitch roof behind a set-back deck.
Higher-end wood-burning appliances and gas inserts sometimes need the burner pulled for cleaning, and a gas insert with a failing vent needs its own kind of attention. We work with the full range of professional components from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, so the parts are matched to the job rather than swapped for whatever’s closest on a shelf.
What Affects Fireplace Services Pricing in Clarksville
Plenty of local chimney work is standard across the country, but some of what we see here sits in our own backyard. Here’s what actually moves a Clarksville price.
- The age and construction of your home. Clarksville has grown quickly, and that means a mix of brand-new builds and much older homes. An older masonry chimney near downtown or in the neighborhoods off Riverside Drive is more likely to have loose mortar, a failing crown, or an unlined flue than a house built in the last ten years out toward Sango or St. Bethlehem. Older homes tend to run higher on the repair side.
- How much creosote has built up. A heavily glazed creosote layer is harder to remove than a light, fluffy one, and it can mean the sweep takes longer. It also raises the risk of a chimney fire, which is exactly why we don’t skip it.
- Clay soil and water intrusion. The heavy clay soils common around Clarksville hold water against masonry foundations and crowns. Cracks that let water in during our wet spring and fall rains turn into spalling brick and failed mortar over time, which is repair work you didn’t plan on. A good crown and cap prevent a lot of it.
- Flue damage and whether it can be resurfaced. Not every cracked flue needs a full liner. HeatShield ceramic resurfacing can restore a deteriorated flue tile to serviceable condition at a fraction of a full reline cost, when the damage is still in the repairable range. If the flue is unlined or too badly compromised, a DuraFlex flexible liner is the right call.
- Roof access and height. A tall stack, a steep pitch, or a chimney tucked behind a tall peak adds time to set up safely. That’s real labor, and it shows up in the estimate.
- Whether you bundle the dryer vent. Adding dryer vent cleaning alongside the chimney sweep is usually less than a standalone visit, since we’re already set up to address one of the leading causes of residential house fires. One call covers both.
How to Save on Fireplace Services
The single biggest way to control the cost of chimney sweep Clarksville work is to catch problems early. A clean flue and a sealed crown cost far less than a reline you could have avoided.
- Book the annual clean before it becomes a repair. A light creosote layer and intact mortar are cheap to maintain. Glazed creosote, spalling brick, and water intrusion are not. Keep the annual inspection current and you’ll stay on the low end of the ranges above.
- Ask about resurfacing before replacement. If the flue tiles are cracked but the structure is sound, HeatShield ceramic resurfacing can restore the flue without a full liner install. It’s a cost-conscious repair that most sweep-only operations can’t offer because they don’t carry the materials.
- Fix the crown and cap now, not later. These are low-cost items that keep water out of the masonry. A $300 to $900 crown repair today can prevent thousands in structural work later.
- Bundle the dryer vent. If you’re booking a chimney sweep anyway, adding the dryer vent clean is a smart, lower-cost add-on and addresses a genuine fire hazard in the same visit.
- Get the written estimate first. We give you a free estimate that lays out what we found and what the fix costs, and that written price is what you pay. Call (866) 942-9931 to start. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday.
For homeowners moving into an older Clarksville home, a full assessment before the first fire is worth the modest cost. A chimney that looks fine from the hearth can have a flue that’s never been lined. For a closer look at how we handle that kind of evaluation, see our Clarksville service area.
Repair or Replace: Which Makes Sense?
Repair is almost always cheaper when the damage is confined to flue tiles, mortar, the crown, or a damper. Replacement wins when the flue is unlined, has shifted or separated, or has been damaged by a past chimney fire beyond what resurfacing can safely address. We diagnose it during the inspection and tell you which side of the line you’re on. If it’s the liner, a DuraFlex flexible system is the durable answer; if it’s the flue tiles, HeatShield resurfacing is often the more economical route. You get the recommendation in writing, and you can decide.
A word on safety
Chimney work involves height, confined flue space, and creosote, none of which is a do-it-yourself job. Creosote ignites at temperatures a wood fire can reach, and a glazed layer needs professional removal, not a homeowner brush. Climbing a roof to inspect or repoint a chimney is a fall risk even for people comfortable on ladders. A trained technician with the right tools and safety gear is the only safe way to handle the flue side of this work. And whether your heat source is wood, gas, or your clothes dryer, the goal is the same: fire safety from the firebox to the vent.
FAQs – Fireplace Services Cost
How much does a chimney sweep cost in Clarksville?
A standard chimney sweep and inspection in Clarksville typically costs $95 to $325, depending on the size of the flue and how much creosote has built up. Call (866) 942-9931 for an exact quote. Estimates are free.
How much does a chimney liner cost in Clarksville?
A full flexible liner installation in Clarksville usually runs $2,400 to $5,500, based on the length and condition of the flue. If the flue can be resurfaced instead, HeatShield repair often falls between $700 and $2,000. Call (866) 942-9931 to find out which applies to your chimney; the estimate is free.
Is it cheaper to repair or replace a chimney flue?
Repair is cheaper whenever the flue can be safely restored. HeatShield resurfacing to fix cracked tiles generally costs far less than a full reline at $2,400 to $5,500. Replacement becomes the right call when the flue is unlined or too badly damaged to resurface. Call (866) 942-9931 and we’ll tell you honestly which one you need.
How much does dryer vent cleaning cost in Clarksville?
Dryer vent cleaning in Clarksville typically runs $75 to $200 standalone, and less when bundled with a chimney sweep. It addresses one of the leading causes of residential house fires. Call (866) 942-9931 to add it to your visit; the estimate is free.
Can you fix what the inspection finds the same day?
Often, yes. Minor repairs like a damper, cap, or small crown fix can sometimes be handled in the same visit, while liner work and masonry repairs are scheduled after the estimate. Our technicians have up to 10 years of experience and we carry the parts to solve what we find. Call (866) 942-9931. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Get Your Free Estimate
Whether you’re booking a routine annual sweep or you need a full assessment of an older chimney before the first fire of the season, we’ll give you a clear, written estimate with no pressure and no surprise fees. We handle cleaning, repair, and dryer vent work under one company, using professional-grade materials like DuraFlex liners and HeatShield resurfacing. Call (866) 942-9931 for your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Clarksville.
Pricing reflects the Clarksville market as of 2026. Chimney Sweep Clarksville offers free estimates – call (866) 942-9931.
What Our Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Jeff Reed"Fixed the problem and it hasn't come back. Took two visits though, because the right part had to be ordered. They didn't charge me for the second trip, so I can't complain too much."
- Shanice Jackson"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Renee Hoffman